Pass the Exam Easily with Detailed 3-Level Practice | 1-Day Full Access Free Offer Ends in
Arabic 
English 
Operating Truck, Semi-Trailer
01/30
1.When coupling a semi-trailer to a tractor, the fifth wheel must be:
The fifth wheel should be clean, lubricated, and the locking jaws must fully close around the kingpin to ensure a safe and secure connection.
01/30
تقدم
Operating Truck, Semi-Trailer
02/30
2.When backing a semi-trailer, it is best to:
Use both side mirrors and reverse slowly and smoothly while watching the trailer movement. Backing should always be done with caution.
02/30
تقدم
Operating Truck, Semi-Trailer
03/30
3.A jackknife occurs when:
A jackknife happens when the trailer swings out of line, often caused by sudden braking, slippery roads, or improper speedu2014especially during sharp turns.
03/30
تقدم
Operating Truck, Semi-Trailer
04/30
4.Before descending a long downgrade with a loaded semi-trailer, you should:
Always shift to a lower gear before descending to use engine braking. Relying only on brakes can cause overheating and reduce stopping ability.
04/30
تقدم
Operating Truck, Semi-Trailer
05/30
5.When driving a loaded semi-trailer, the stopping distance is:
A fully loaded semi-trailer requires significantly longer stopping distance than smaller vehicles, especially at highway speeds or downhill slopes.
05/30
تقدم
Operating Truck, Semi-Trailer
06/30
6.If the trailer’s air supply is not connected properly, it may:
Improper air connection can result in loss of braking ability in the trailer, which is extremely dangerous and can lead to accidents.
06/30
تقدم
Operating Truck, Semi-Trailer
07/30
7.To prevent trailer swing or drift during a turn:
Reduce speed before entering the turn, and avoid sudden movements. This helps the trailer track properly behind the tractor.
07/30
تقدم
Operating Truck, Semi-Trailer
08/30
8.A tug test is used to:
A tug test ensures the fifth wheel is properly engaged with the trailer’s kingpin by gently pulling forward in low gear to check connection.
08/30
تقدم
Operating Truck, Semi-Trailer
09/30
9.If a trailer begins to skid, the first action should be to:
Releasing the brakes can help the wheels regain traction. Do not overcorrect with the steering. Regain control before braking again.
09/30
تقدم
Operating Truck, Semi-Trailer
010/30
10.Before turning right in a truck with a long trailer, you should:
Proper right turns require pulling slightly forward or to the right, then making a wide turn to prevent trailer from hitting curbs or objects.
010/30
تقدم
Operating Truck, Semi-Trailer
011/30
11.If your trailer brakes lock up on a slippery surface, it may cause:
Locked trailer wheels on slippery roads can cause skidding or jackknifing, where the trailer moves independently of the tractor.
011/30
تقدم
Operating Truck, Semi-Trailer
012/30
12.When should the trailer hand valve be used during normal driving?
The trailer hand valve is for testing trailer brakes, not for regular braking while driving. Using it can cause skidding or instability.
012/30
تقدم
Operating Truck, Semi-Trailer
013/30
13.Why is it important to check the glad hands during coupling?
Glad hands connect air lines between the truck and trailer. Check for tight, undamaged connections to ensure safe brake operation.
013/30
تقدم
Operating Truck, Semi-Trailer
014/30
14.When approaching a railroad crossing in a truck with a trailer:
Always ensure the entire truck and trailer can clear the tracks before crossing to avoid getting stuck on or blocking the tracks.
014/30
تقدم
Operating Truck, Semi-Trailer
015/30
15.The longer the combination vehicle, the more you need to:
Longer vehicles require greater stopping distance and wider turning radius, especially at intersections or tight curves.
015/30
تقدم
Operating Truck, Semi-Trailer
016/30
16.What should you do before descending a long downgrade with a heavy semi-trailer?
Shifting into a lower gear before descending helps control speed using engine braking, reducing brake wear and preventing overheating.
016/30
تقدم
Operating Truck, Semi-Trailer
017/30
17.When coupling a trailer, which action ensures the fifth wheel is properly locked?
A tug test ensures the fifth wheel jaws have locked around the kingpin by gently pulling forward with trailer brakes applied.
017/30
تقدم
Operating Truck, Semi-Trailer
018/30
18.What can happen if you drive a semi-trailer with a misaligned trailer connection?
Misalignment leads to increased tire wear, swaying, and loss of control. Always ensure the trailer is aligned straight with the tractor unit.
018/30
تقدم
Operating Truck, Semi-Trailer
019/30
19.When parking a truck and semi-trailer on a hill, what should you do first?
On a slope, wheel chocks help prevent movement even if air pressure drops or parking brakes fail. It’s a key safety measure.
019/30
تقدم
Operating Truck, Semi-Trailer
020/30
20.During a left turn, how do you avoid trailer off-tracking?
Starting wide helps keep the trailer wheels from cutting the corner, reducing the risk of striking curbs or obstacles.
020/30
تقدم
Operating Truck, Semi-Trailer
021/30
21.Which gear should be used when starting a fully loaded semi-trailer on an incline?
Low gear provides maximum torque for starting heavy loads on inclines, preventing rolling back or stalling.
021/30
تقدم
Operating Truck, Semi-Trailer
022/30
22.When should you check that air pressure has built up to the proper level before driving?
Air pressure must reach safe levels before brake systems operate properly. Releasing brakes early can cause roll-away or brake failure.
022/30
تقدم
Operating Truck, Semi-Trailer
023/30
23.If your trailer starts to jackknife, what is the best first response?
Jackknifing occurs when the trailer swings uncontrollably. Applying trailer brakes may help straighten the trailer before it worsens.
023/30
تقدم
Operating Truck, Semi-Trailer
024/30
24.When driving an articulated truck through strong crosswinds, what should you watch for?
High-sided trailers are vulnerable to crosswinds, which can cause swaying or even tipping if not controlled.
024/30
تقدم
Operating Truck, Semi-Trailer
025/30
25.Why is it important to check gladhand seals during inspection?
Gladhands connect air lines between tractor and trailer. Damaged seals cause air leaks, reducing brake efficiency.
025/30
تقدم
Operating Truck, Semi-Trailer
026/30
26.How do you reduce brake fade on long descents?
Engine braking combined with a lower gear allows controlled descent without overusing service brakes, preventing fade.
026/30
تقدم
Operating Truck, Semi-Trailer
027/30
27.When uncoupling a trailer, what is the final step?
The last step is to gently pull the tractor forward and confirm the trailer is stable with landing gear fully deployed.
027/30
تقدم
Operating Truck, Semi-Trailer
028/30
28.What causes trailer swing or fishtailing at high speeds?
Fishtailing is caused by sudden movements, high speed, or unbalanced loads. It’s dangerous and can lead to a crash.
028/30
تقدم
Operating Truck, Semi-Trailer
029/30
29.What is the best action if you hear loud air leakage while parked?
Any significant air leak from air brake components should be reported and repaired immediately before operating the vehicle.
029/30
تقدم
Operating Truck, Semi-Trailer
030/30
30.When reversing a semi-trailer, what is the safest practice to follow?
When reversing a truck with a semi-trailer, always use a trained spotter, check surroundings, and reverse slowly to prevent accidents or damage.
030/30
تقدم
تقدمك 0/30
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
0 صحيح
x 0 غير صحيح
- النتيجة 80 ٪
اجتياز اختبار DMV في محاولتك الأولى
اختبارات وهمية غير محدودة
الوصول إلى أكثر من 1000 اختبار مثل الأسئلة لـ فقط $3
ايس امتحان DMV على
محاولتك الأولى