Warning signs Test
01/19
1.The visual architecture of this sign consists of an upward-pointing triangular panel with a thick red border and a white background, featuring a centered black symbol of vertically arranged traffic lights. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately reduce your speed and prepare for a controlled approach toward a signalized intersection. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Begin scanning ahead for the traffic signal status, especially if visibility is limited due to curves, hills, or environmental conditions. Be prepared to stop smoothly if the signal changes. This early recognition helps prevent sudden braking and reduces the risk of rear-end collisions while ensuring a safe and predictable approach to the intersection.
01/19
Progress
Warning signs Test
02/19
2.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered red octagon displaying the bilingual text "قف & STOP". What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for a complete stop at the upcoming intersection. Check your mirrors to remain aware of vehicles behind you before decelerating. Begin scanning ahead to locate the actual stop sign, especially in areas where visibility may be limited by curves, elevation changes, or roadside obstacles. Gradually apply braking to ensure a smooth and controlled stop. This early recognition helps prevent sudden braking and minimizes the risk of rear-end collisions while ensuring full compliance with traffic control at the junction.
02/19
Progress
Warning signs Test
03/19
3.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a smaller, downward-pointing equilateral triangle with its own thick red border centered inside. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare to give way at the upcoming junction. Check your mirrors to remain aware of vehicles behind you before decelerating. Start scanning the intersection area early for approaching traffic that has priority. Be ready to stop if necessary, but proceed smoothly if the الطريق ahead is clear and safe. This early recognition helps ensure a controlled and predictable merge into traffic while minimizing the risk of sudden braking or collisions.
03/19
Progress
Warning signs Test
04/19
4.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of three curved arrows arranged in a circle. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for a circular traffic flow at the upcoming junction. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Start scanning the roundabout for circulating traffic that has priority. Position your vehicle in the correct lane based on your intended exit and be ready to yield at the entry point. This early recognition helps ensure a smooth and controlled entry into the roundabout while minimizing the risk of sudden braking or unsafe maneuvers.
04/19
Progress
Warning signs Test
05/19
5.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a T represented by a vertical bar met by a horizontal bar at the top. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for the road to end at an upcoming junction. Check your mirrors to remain aware of vehicles behind you before decelerating. Start scanning left and right for cross-traffic that may have priority. Be ready to stop or yield as required and plan your turn in advance. This early recognition helps ensure a controlled and safe approach to the junction while preventing sudden braking or missed turns.
05/19
Progress
Warning signs Test
06/19
6.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a vertical upward arrow with a horizontal bar extending to the right. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and increase your awareness of the road environment. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Start scanning the right side of the road for vehicles that may enter or cross your path. Be prepared to adjust your speed or position as needed to maintain safe spacing. This early recognition helps ensure a smooth and controlled passage through the junction while minimizing the risk of unexpected conflicts.
06/19
Progress
Warning signs Test
07/19
7.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a vertical upward arrow with horizontal bars extending to the left and right at different heights. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and increase your situational awareness. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Start scanning both sides of the road for vehicles that may enter or cross your path from closely spaced junctions. Be prepared for multiple merging or turning movements in quick succession. This early recognition helps ensure a controlled and safe passage through a complex road layout while minimizing the risk of unexpected conflicts.
07/19
Progress
Warning signs Test
08/19
8.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a vertical line with a diagonal branch extending to the lower right. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and increase your awareness of the surrounding road environment. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Start scanning the right side for vehicles that may merge or enter your path from the side road. Be prepared to adjust your speed or position to maintain safe spacing. This early recognition helps ensure a smooth and controlled passage through the junction while minimizing the risk of unexpected conflicts.
08/19
Progress
Warning signs Test
09/19
9.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a diagonal main line with a short vertical branch extending downward from its center. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and increase your awareness of the road ahead. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Start scanning the left side for vehicles that may merge into your lane, especially in areas where visibility may be limited. Be prepared to adjust your position or speed to allow safe merging. This early recognition helps ensure a smooth and controlled traffic flow while minimizing the risk of sudden conflicts.
09/19
Progress
Warning signs Test
010/19
10.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a U represented by a thick inverted U-shape with a downward-pointing arrowhead on the left end. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and increase your awareness of the traffic ahead. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Be alert for vehicles slowing down or stopping to make a U-turn across your path. Maintain a safe following distance to allow adequate reaction time. This early recognition helps prevent sudden braking situations and ensures a smooth and controlled flow of traffic near the turning point.
010/19
Progress
Warning signs Test
011/19
11.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of two parallel vertical arrows, with one pointing downward on the left and one pointing upward on the right. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for traffic approaching from the opposite direction. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Maintain proper lane discipline and keep to your side of the road to avoid conflicts with oncoming vehicles. Increase your vigilance, especially if transitioning from a one-way or divided road. This early recognition helps prevent head-on collisions and ensures a safe and controlled adaptation to the new traffic flow.
011/19
Progress
Warning signs Test
012/19
12.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a single vertical bar at the top that splits into two parallel vertical bars at the bottom. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for the road to transition into a two-way traffic flow. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Maintain proper lane discipline and be ready to merge safely as the divided road ends. Increase your awareness for oncoming traffic that will now be closer and without a physical divider. This early recognition helps ensure a smooth and controlled transition while minimizing the risk of head-on conflicts.
012/19
Progress
Warning signs Test
013/19
13.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black arrow curving upwards and to the left. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for a change in road alignment. Check your mirrors to remain aware of vehicles behind you before decelerating. Maintain a stable steering input and position your vehicle correctly within your lane as you approach the bend. Avoid sudden braking while entering the curve to maintain traction and control. This early recognition helps ensure a smooth and safe navigation through the bend while minimizing the risk of skidding or loss of control.
013/19
Progress
Warning signs Test
014/19
14.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a line that bends to the left and then upwards, ending in an upward-pointing arrowhead. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for successive changes in road direction. Check your mirrors to remain aware of vehicles behind you before adjusting your speed. Maintain a stable lane position and avoid sudden steering or braking inputs as you approach the bends. Stay alert for limited visibility and potential hazards within the curves. This early recognition helps ensure smooth vehicle control and reduces the risk of skidding or lane deviation through the series of bends.
014/19
Progress
Warning signs Test
015/19
15.The visual architecture of this sign consists of an upward-pointing equilateral triangular panel with a thick red border and a solid white background, featuring a centered black symbol of a straight vertical line on the right and a left-side line bending inward toward it. What specific warning does this design communicate to the driver?
When you identify this warning sign from a distance, you should immediately begin reducing your speed and prepare for a decrease in road width from the left side. Check your mirrors to remain aware of vehicles behind you before adjusting your position. Stay centered in your lane and be alert for vehicles that may need to merge from the left. Avoid sudden steering or braking movements to maintain stability. This early recognition helps ensure a smooth and controlled transition through the narrowed section while minimizing the risk of side-swipe collisions.
015/19
Progress
Warning signs Test
016/19
16. Does the sign feature an upward-pointing equilateral triangle with a thick red border and a solid white background, consisting of two vertical bars that both bend inwards towards each other?
Alerts drivers that the road ahead is narrowing from both sides, creating a potentially tighter passage for vehicles. It provides essential advance notice of a decrease in road width, which may require motorists to reduce their speed and carefully judge the available space. By highlighting this upcoming bottleneck, the sign helps prevent side-swipe accidents and ensures that drivers are prepared for oncoming traffic in more confined conditions. Motorists should respond by staying alert and maintaining a central position in their lane to navigate the narrowing section safely.
016/19
Progress
Warning signs Test
017/19
17.Does the sign feature an upward-pointing equilateral triangle with a thick red border and a solid white background, represented by a stone archway surrounding a dark opening?
Alerts drivers to an upcoming tunnel, where lighting and driving conditions are likely to change significantly upon entry. Featuring a centered symbol of a stone archway, it provides essential advance notice for motorists to turn on their headlights and prepare for a transition from bright daylight to a darker environment. By highlighting this feature, the sign helps prevent accidents caused by sudden vision impairment or narrowed lane widths often found within tunnel structures. Drivers should respond by maintaining a steady speed and avoiding unnecessary lane changes while navigating through the enclosed roadway safely.
017/19
Progress
Warning signs Test
018/19
18. Does the sign feature an upward-pointing equilateral triangle with a thick red border and a solid white background, featuring centered black symbols for a height limit, represented by a downward-pointing arrowhead at the top and an upward-pointing arrowhead at the bottom with the text "ہے ٤.٩ & 4.9m" in both Arabic and English positioned between them?
Alerts drivers to a restricted overhead clearance ahead, indicating the maximum height allowed for vehicles to pass safely under an upcoming bridge or structure. Featuring vertical arrows and numerical measurements in both Arabic and English, it provides essential advance notice for operators of tall vehicles to assess their clearance requirements. By highlighting this physical limitation, the sign effectively prevents dangerous collisions with overpasses that could result in severe structural damage or serious injuries. Drivers of over-height vehicles must respond by identifying an alternative route immediately to ensure a safe passage around the obstruction.
018/19
Progress
Warning signs Test
019/19
19.Does the sign feature an upward-pointing equilateral triangle with a thick red border and a solid white background, containing a centered black symbol of children crossing, represented by the silhouettes of two children of different heights walking together?
Alerts drivers to the likely presence of children near schools, playgrounds, or residential areas. The black silhouette of two children walking together provides essential advance notice that young pedestrians may be crossing or playing near the road. Since children can be unpredictable and less visible to motorists, this sign serves as a critical reminder to significantly reduce speed and increase vigilance. Ultimately, it helps prevent accidents involving vulnerable road users by ensuring drivers are prepared to stop immediately if a child enters the roadway.
019/19
Progress
Your Progress 0/19
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
0 Correct
x 0 Incorrect
- Passing Score 80%
Ace the DMV Exam on Your First Attempt
Unlimited mock tests
Access Over 1000 Exam Like Questions for Just $3
Ace the DMV Exam on
Your First Attempt