Turning and U-turning - Saudi Drivers Test

Turning left on highways where no allocated places exist for this.

It is prohibited to turn left on highways unless there are designated areas specifically for this maneuver, to ensure traffic flow and safety.

A turn that constitutes a risk to the driver or road users.

Any turn that poses a risk to the driver or other road users is prohibited, emphasizing safety as the paramount concern in all driving maneuvers.

A hand signal from a traffic policeman or a sign prohibits turning.

Drivers are required to obey signals from traffic police and traffic signs that prohibit turning in a given direction.

Turning at places without traffic signs that prohibit passing in the required direction.

You are allowed to turn in places where there are no traffic signs prohibiting passage in the direction you intend to turn.

Making a turn at an acute angle or an increased wide angle than necessary.

When turning, it is prohibited to turn at an excessively sharp or wide angle, or to sway or move between lanes after turning, as this can be unsafe.

Taking a decision before arriving at the intersection and watching signs.

Drivers should make turning decisions and observe relevant signs well in advance of reaching an intersection to ensure a smooth and safe maneuver.

Watching traffic motion using mirrors by looking back and starting to use direction lights for alert.

Before initiating a turn, it is essential to check traffic flow using mirrors, including looking back, and activate your direction lights to signal your intentions to other road users.

Reducing speed gradually or stopping according to traffic lights, traffic signs, or guidance signals.

Adjusting your speed or stopping as dictated by traffic lights, signs, or other signals is crucial for safely executing a turn and complying with traffic regulations.

You see a "No Turning" sign with a red frame and diagonal lines.

This sign explicitly prohibits turning in the direction shown by the arrow, indicating that such a maneuver is not allowed for safety or traffic flow reasons.

You see a "Direction Sign" with blue arrows.

These signs, often rectangular with a white background and blue arrows, indicate compulsory directions that vehicles must follow.

You see a "No U-Turning" sign with a red frame and diagonal lines.

This circular sign, with a red frame and diagonal lines, indicates that U-turns are prohibited at this location.

You are driving and come across a U-Turn Directional Sign.

A U-Turn Directional Sign guides drivers to specific locations where U-turns are permitted and mandatory.

Approaching a turn, which action should be done before arriving at the intersection?

Before reaching an intersection, it’s crucial to be in the correct lane and observe traffic, pedestrians, and potential risks to ensure a safe turn.

What you must avoid when making a turn at an intersection.

Turning too sharply or too widely can be unsafe and is prohibited. Drivers should maintain a controlled turning path.

After completing a turn, You should

After executing a turn, drivers must merge smoothly into the appropriate lane, ensuring it’s safe to do so without disrupting traffic flow.

A traffic policeman gives a hand signal prohibiting a U-turn.

Drivers must obey all signals from traffic police, even if they contradict other signs or rules.

What is the penalty for a wrong U-turn.

While the specific document isn’t provided, 200 KD is a common fine for traffic violations.

Can making a U-turn near a pedestrian crossing dangerous

U-turns near pedestrian crossings create multiple hazards by conflicting with pedestrian right-of-way and potentially disrupting regular traffic flow, increasing the risk of accidents.

What must be ensured before making a U-turn?

Before attempting a U-turn, it’s critical to verify that the area is clear and visible to all approaching drivers to avoid potential collisions.

Reason for a U-turn to be prohibited in specific areas.

U-turn prohibitions are put in place to prevent traffic congestion, maintain smooth flow, and minimize the risk of accidents, especially in areas with complex traffic patterns or limited visibility.

Safely making a U-turn at an intersection.

To safely execute a U-turn at an intersection, drivers must thoroughly check for oncoming and surrounding traffic and clearly signal their intention to turn.

Mandatory action when U-turning near a traffic diversion.

When near a traffic diversion, especially if U-turning, it is mandatory to adhere strictly to all diversion instructions to maintain safety and traffic order.

What happens if you exceed the specified speed limit.

Exceeding speed limits is a traffic violation that carries legal consequences, including monetary fines and other penalties.

What to do if another vehicle wants to pass you.

It is courteous and safe driving practice to facilitate overtaking by other vehicles when conditions permit, especially if you are driving slower.

The rule for a road with a broken line separating two opposite lanes.

A broken line typically indicates that crossing is allowed for overtaking, but the default position is the right lane.

What to do if the road has a double continuous line.

Double continuous lines indicate that changing lanes or overtaking by crossing the lines is strictly forbidden for safety reasons.

When you should stay in the far right lane.

The far right lane is generally for slower traffic, allowing faster vehicles to pass on the left.

What to do when approaching a broken line dividing two lanes.

A broken line allows for passing, but the primary lane for non-overtaking vehicles remains the right lane.

What to do when approaching a vehicle that is turning left in front of you.

Keeping a safe distance allows for adequate reaction time and prevents rear-end collisions as the vehicle ahead slows down for its turn.

The proper way to handle driving at a lower speed than the speed limit.

Slower vehicles should keep to the rightmost lane to avoid impeding faster traffic, maintaining smooth traffic flow.

What to do when approaching a jam on a narrow road.

On narrow roads, especially with oncoming traffic, keeping to the right provides necessary clearance and prevents further congestion.

What to do when you need to change lanes.

This multi-step process ensures that the lane change is performed safely and that other drivers are aware of your intentions.

What happens if you rely only on your side mirrors when changing lanes.

Side mirrors have blind spots, making it critical to physically check over your shoulder to ensure the adjacent lane is clear before changing.

How to steer the vehicle safely when driving faster.

At higher speeds, even minor steering inputs have a greater effect, requiring more careful and precise control to maintain stability.

On a one-way street, where you should be positioned to make a left turn.

On one-way streets, the leftmost lane is designated for left turns to facilitate orderly traffic flow and prevent conflicts.

Where to position yourself to make a U-turn on a two-way street.

This positioning allows for the widest turning radius and avoids impeding traffic in other lanes while performing a U-turn.

When planning to turn left and then right at the next intersection, which lane to take first.

Choosing the appropriate lane from the outset is crucial for smooth and safe navigation through consecutive turns, preventing last-minute lane changes.

If the road is divided into several lanes, which lane a slower vehicle should use.

The far right lane is typically designated for slower traffic or vehicles preparing to exit or turn right, ensuring efficient traffic flow.

What you should always ensure before making a turn at an intersection.

Being in the proper lane before a turn prevents unnecessary maneuvers, reduces confusion for other drivers, and enhances safety.